Description
Monster Overview:
For connections that leave no margin for error, choose NSPA MultiLink™ Sealed Crimp and Solder Butt Connectors. These clear 24–22 AWG connectors combine the strength of crimping with the integrity of a lead-free solder seal for a waterproof, vibration-resistant connection that stands the test of time.
Each connector features a visible solder sleeve with a central wire stop, seamless barrel, and adhesive-lined heat shrink tubing. The RoHS-compliant solder used has a lower melting point and higher tensile strength than traditional lead-based solder, allowing quicker installs with safer performance.
Monster Features:
- Brand: NSPA MultiLink™
- Connector Type: Sealed Crimp & Solder Butt Connector
- Seal Type: Crimp, solder, and heat shrink – triple-seal protection
- Made in: USA
- Solder: Lead-free, low-temp solder with high strength and RoHS compliance
- Barrel: Seamless design with internal wire stop and inspection window
- Tubing: Clear adhesive-lined polyolefin, 3:1 shrink ratio
- Waterproof Rating: IP67 when properly installed*
- Compliance: RoHS compliant, no hazardous metals
Monster Specifications:
- Color Code: Clear
- Wire Gauge: 24–22 AWG
- Part #: MLF5-20
- Seam Type: Seamless barrel with central wire stop and solder window
- Material: Tinned copper + lead-free solder + adhesive-lined tubing
Installation Instructions:
- Strip both wires to 5/16" (8 mm)
- Insert wires into opposite ends until they meet at the wire stop
- Crimp securely with a ratcheting crimp tool
- Heat tubing, starting at the center and working outwards
- Focus on solder sleeve—rotate as you apply heat until solder melts and flows
For best results: Use a heat device of at least 1000 °F (538 °C). Distribute heat evenly and avoid isolating flame or overheating one spot.
Order Yours Today from Monster Bolts!
NSPA’s MultiLink connectors offer the highest sealing security with a simple, repeatable process. Stock up now for your next automotive, marine, or industrial project—only at Monster Bolts.
* There is no official UL standard for “waterproof” electrical connectors. When properly installed, these connectors typically meet IP67: dust-tight and protected against temporary immersion (15 cm to 1 m for up to 30 minutes).