Bulk 1/4″-20 Slotted Hex-Washer Thread-Cutting Screws — Type F, 410 Stainless Steel


Length: 1000 Qty - 1/4-20 x 3/4"
Price:
Sale price$487.95

Description

MonsterBolts Bulk 1/4-20 Slotted Hex-Washer Thread-Cutting Screws — 410 Stainless

Monster Overview:

Engineered for trailer frames, marine fixtures, food-equipment skins and hardwood-to-steel assemblies, these 1/4″-20 Slotted Hex-Washer Thread-Cutting Screws deliver bolt-strength clamp loads— no backing nut required. Forged from 410 martensitic stainless steel, they are heat-treated to Rockwell C38-45 for abrasion resistance yet retain stainless corrosion protection. The indented hex head with integral washer spreads load and covers oversize holes, while the wide flat-blade slot offers a backup drive where a socket can’t reach. Each screw is passivated for added rust resistance and finished with a factory dry-wax film for predictably low seating torque. A Type F fluted point taps clean female threads in a pre-drilled or punched hole; chips exit through the flute—no chip clean-up, no welds, no nut.

Monster Features:

  • Dual-Drive Head: Indented 1/4″ hex (3/8″ wrench) plus broad slot—drive with socket, impact gun or flat screwdriver.
  • Integrated Washer: Enlarged bearing surface resists pull-through and helps seal joints in thin sheet.
  • Type F Cutting Point: UNC machine thread with fluted slot—forms threads in 0.050–0.200″ steel plate or dense hardwood; chips exit cleanly.
  • Material Advantage: 410 stainless is magnetic, heat-hardened and offers better wear & strength than 18-8 while retaining corrosion resistance.
  • Finish & Lube: Passivated surface + factory dry-wax (silicone-free) for consistent clamp load.
  • Bulk Packaging: Factory-sealed cartons—ideal for OEM fabrication, dock builders & stainless construction projects.

Monster Specifications:

  • Diameter / Thread: 1/4″-20 UNC — Type F cutting point (fully threaded)
  • Lengths Offered: ¾″ (0.750 in.) & 1″ (1.000 in.)
  • Head Style: Slotted indented hex-washer (3/8″ wrench)
  • Drive Methods: External hex • flat-blade screwdriver
  • Material: 410 heat-treated stainless steel (Rc 38-45)
  • Finish & Lube: Passivated • factory dry-wax film
  • Standards: SAE J476 Type F • IFI 136

More Monster Bolts:

• Browse the complete Type F thread-cutting lineup
• Need thread-formers? Explore our PT / Plastite collection

Order Yours Today & Feel the Monster Bolts Difference!

Every bulk carton ships quickly from our U.S. warehouse and is backed by the Monster Bolts quality guarantee and responsive support.

You may also like

Recently viewed